The NEXUS Fire Alert system is ideal for temporary or evolving sites, i.e. construction and utility sites, that require a robust alert to fire. As it is fully portable and wire-free, it can be installed quickly and simply without the need for civil works.
NEXUS Fire Alert units comply with current HSE Fire Safety Guidelines (HSG168) regarding audible and visual alerts to fire on construction sites. There are 32 different alert sounds to choose from that are accompanied by a visual flashing beacon light.
Why choose the NEXUS Fire Alert system?
The Background Fires can break out on any construction site and according to the insurance industry there are 104,000 fires each year which make up 25% of all work-related deaths. Constructions sites are hazardous for fire as they will have a large amount of combustible materials on site.
Fires can break out on any construction site and according to the insurance industry there are 104,000 fires each year which make up 25% of all work-related deaths.
Constructions sites are hazardous for fire as they will have a large amount of combustible materials on site. Added to this risk are the increasing number of timber framed structures being built and one can immediately see why a fire alert system is essential on site.
HSE Fire Safety guidelines (HSG168) require sites have a visual and audible alert to fire. These guidelines state ‘the aim of any fire warning system is to ensure that people on site are alerted to make their escape before a fire becomes life-threatening. The essential requirements of the fire warning are that it is distinctive, clearly audible above any other noise and is recognised by all the people on site.’
HSG168 expresses the importance of an ‘inter-connecting system of call points and sounders’ for alerting a busy construction site to the need to evacuate. The old wind up bell that used to be on many construction sites is now no longer compliant with new guidelines as there must be an audible and visual alert to fire.
The UK construction industry is governed by a number of laws, guidelines and codes of practice including the Construction (Design & Management) Regulations 2015 (CDM), Regulatory Reform (Fire Safety) Order of 2005 and the BS5839-1 Fire Detection and Fire Alarm Systems for Buildings. These set out fire safety requirements and each specifies that an appropriate fire alert system for evacuation must be used. The Nexus Fire Alert system has been designed to meet these requirements and has been built with the robust nature of construction sites in mind.
It is vital that staff managing the construction site carry out a regular fire and security risk assessment of the area and review it as the site progresses. Staff should be made aware of potential risks and subsequent mitigating measures that have been put in place. Regular training and testing of the equipment should be carried out.
NEXUS Fire Alert System Explained
The Nexus Fire Alert system comprises battery operated units which can be quickly installed on the working construction site whilst building is in progress and as they are battery powered and easily deployable, they can grow and move as the construction progresses. Battery life is around three years. A maximum of 64 units can be installed per site, with 16 mesh hops up to 1km apart. When one NEXUS unit is activated it will trigger all units in range to sound an audible alert or evacuation message, accompanied by a flashing beacon light.
The NEXUS call points and sounder / beacons are available as both internal and external (weatherproof) variants. Cages are also available for external units which may be prone to debris hitting them, causing a false alarm. Decibel levels can be adjusted so that external units can be louder than internal units. The maximum decibel level is 100 dcb and there are 32 alert sounds to choose from.
Alternatively an annunciator variant can be ordered which has a built in strobe. Here a bespoke evacuation message can be sounded rather than an alert.
The NEXUS PC App
The use of the Nexus PC app is an option and not a requirement. If using the PC app you will require a masthead receiver. The PC app also allows one central location, normally the site office, to monitor and control activated units. From here the user can re-set the system after activation, although the original depressed call point will have to be manually re-set. A silent test can be made via the PC app or a short or longer test if needed. We would advise that the system is tested weekly in line with fire alarm procedures.
The Fire Alert system may be activated in response to any number of situations ranging from a fire detected on the site to an intruder or rogue vehicle spotted on the premises. This is where the NEXUS PC app email function can be utilised to it’s fullest. The app allows for 3 email addresses to be notified in the event of activation. So in this situation the Site Manager can further clarify the severity of the event to other key staff so that a proportionate response to these different situations can be implemented.