INTRODUCTION

An Aspirating Smoke Detection Solution

VESDA (Very Early Smoke Detection Apparatus) is a very early warning aspirating smoke detection solution. With continuous air sampling, it provides the earliest possible warning of an impending fire hazard. VESDA aspirating smoke detectors buy the critical time needed to investigate an alarm and initiate an appropriate response to prevent injury, property damage or business disruption.

 

VESDA detectors have multi-level warnings and a wide range of sensitivity that does not degrade or change over time, so even minute levels of smoke can be detected before a fire has time to escalate. In addition, VESDA systems are manufactured using targeted Six Sigma techniques, ISO 9000 standards and have been certified by regulatory bodies worldwide.

What’s great about VESDA?

Sensitive


With continuous air sampling, it provides the earliest possible warning of an impending fire hazard

False Alarm Reduction


With multi-level warnings and a wide range of sensitivity, false alarms can be reduced

Multi-Level Warnings


Multi-level warnings and a range of sensitivity that does not degrade or change over time - even minute levels of smoke can be detected

Approvals


The range has been certified by regulatory bodies worldwide and meets ISO 9000 standards

What does VESDA have to offer?

Dual-Stage Filter


To remove dust and dirt from the air before it enters the laser detection chamber

Laser Detection Chamber


When smoke is present the light is scattered and processed by the sensitive receiver system

Absolute Scaling


Whereby the system assumes that the normal environment has zero smoke pollution, the sensitivity can then be adjusted accordingly to the environment

Communicate

Information


Communicate Information to a fire alarm control panel, a software management system, or a building management system, via relays or a high level interface

Accessories


Such as moisture traps, are available to ensure to ensure reliability even in the most challenging environments

 

Fire Link 100

Model FIRElink-100 is designed to provide very high sensitivity smoke detection in a small package.  A unique sensing technology ensures that the detector operates at optimum sensitivity for the protected environment, without the need for complex setup.  This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.

The detector is designed to fit into a Docking Station which accepts all sampling pipes and cables leaving the detector to be fitted during the final commissioning phase.  This ensures that the detector is less likely to be damaged during installation.

Volt-free Fire 1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems

Fire Link 25

Model FIRElink-25 is designed to provide very high sensitivity smoke detection in a small package.  A unique sensing technology ensures that the detector operates at optimum sensitivity for the protected environment, without the need for complex setup.  This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.

The detector is designed to fit into a Docking Station which accepts all sampling pipes and cables leaving the detector to be fitted during the final commissioning phase.  This ensures that the detector is less likely to be damaged during installation.

Volt-free Fire 1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.

Fire Link 400

Model FIRElink-400 is designed to provide very high sensitivity smoke detection using an aspirating technique. A unique sensing technology ensures that the detector operates at optimum sensitivity for the protected environment, without the need for complex set-up.

The detector is available in three formats, the standard detector (FIRElink-400), the standard detector plus Command Module (FIRElink-400CM) and a standalone Command Module (FIRElink-CM). The Command Module variants provide a single location display, control and interfacing option for systems of up to 127 detectors and allow global programming of all detector functions simultaneously.

Fire Link 400CM

Model FIRElink-400CM is designed to provide very high sensitivity smoke detection using an aspirating technique.  A unique sensing technology ensures that the detector operates at optimum sensitivity for the protected environment, without the need for complex set-up.

With the integrated Command Module this unit also provides a single location display, control and interfacing option for systems of up to 127 detectors and allow global programming of all detector functions simultaneously