GSM/GPRS Module

The GSM/GPRS module is an easy to add plug-in module that enables the system to communicate over the GPRS/GSM networks for reporting, control and programming. It can be used as the primary communication or as a back up for the IP or PSTN communications in case of communication failure.

Reporting events to monitoring stations can be done over voice, SMS or GPRS using the RISCO IP Receiver. Events can be reported in SIA/IP, SIA and Contact ID monitoring protocols.

Using the GSM/GPRS module, end users can obtain system control using DTMF or  SMS In addition, users can enjoy peace of mind by receiving real time SMS, voice messages and email alerts.

The GSM/GPRS module also supports two- way voice communication which is beneficial for elderly care, allowing two way communication with users in times of emergency.

Plug in GSM Module LightSYS-Aglity

IP Module

The IP Module is an easy to add plug-in module that enables the system to communicate over a TCP/IP network. It can be used as the primary communication or as a back up to a GSM/GPRS or PSTN communication in case of communication failure.

The IP Module uses common format protocols (SIA, Contact ID) to send alerts to monitoring stations using the RISCO IP Receiver that connects the alarm systems to the central monitoring management software. In addition, the system can send events in SIA IP protocol over TCP/IP to monitoring stations that have standard IP receivers. For end users, the IP module enables sending email alerts and system status information. The IP Module enables remote programming of the panel using the configuration software.

Agility IP Communication Module

LightSYS™ Voice Module

Multi-lingual and providing audible information on the status of the LightSYS™ system. Enables any remote, touch-tone (DTMF) telephone to serve as the system keypad.

 Voice Module LightSYS -Agility

Multi-Socket IP Module

The Multi-Socket IP Module is an easy to add plug-in module that enables the system to communicate over a TCP/IP network. It can be used as the primary communication or as a back up to a GSM/GPRS/3G or PSTN communication in case of communication failure.

The Multi-socket IP module allows simultaneous communication from the ProSYS™Plus or LightSYS™ 2 (above version 5.00) to multi destinations as RISCO Cloud, Direct communication to Monitoring Station, Follow Me, and Configuration Software or SynopSYS.

By using multi-socket 2G or 3G module with multi-socket IP module a cloud redundancy can be achieved.

The multi-socket IP module uses common format protocols (SIA, Contact ID) to send alerts to monitoring stations using the RISCO IP receiver that connects the alarm systems to the central monitoring management software. In addition, the system can send events in SIA IP protocol over TCP/IP to monitoring stations that have standard IP receivers. For end users, the IP module enables sending email alerts and system status information. The IP module enables remote programming of the panel using the configuration software.

Wireless Repeater

The one way Wireless Repeater is used for extending the wireless range between RISCO Group’s systems and their one way wireless accessories. The repeater can extend the distance in a regular environment or increase the distance in environments with a high level of noise that can affect the distance.Several wireless repeaters can be chained together (up to 7), so that the potential range can be greatly extended.